NT WORKSTATION 4.0
NT WORKSTATION 4.0
- question on automated install.
- question on optimizing harddrive and system.
- question about adding a workgroup to an existing "domain".
- question on CSNW & what service it allows.
- question on which utility to use to dump "application error" info.
- question on file system type FAT vs. NTFS.
- question on method of installing MIDI device.
- question on method of sharing a file.
- question on assigning priority levels of software.
- question on how to start a given program with a low priority.
- question about mapping to an address on internet; \xxx.com.
- question about an user who desires to monitor the event viewer.
- question on system policy vs. individual policy.
--------------------------------------------------------------------
Required: he wants to secure his own files. He wants to setup as part of a domain.
Optional: others users should control files they create.
DavidP should authenticate users from Domain Usernames & passwords
Solution: Implement NT Workstation. Implement NTFS. Put DavidP in a workgroup. Make DavidP the Administrator & rename the account. Remove all others from Administrators.
I said it met the required, and one optional. Since they put it in a workgroup, he can't use the domain to authenticate.
I had 2 other problems on unattended installation
<1> You have 30 laptops, identical, and 50 workstations, identical.
Required: perform unattended install.
Solution: use unatend answer file, UDF, and sysdiff.
I said does not meet the required.
8 questions later, I get the same exact case, but THEN it said for a solution, use TWO unattend files, to reflect differences in hardware, along with UDF and sysdiff. I said that would meet the required.
There was one on there that said you just installed TCP/IP. You want to configure the WS to be an FTP Server. What do you do?
There was a bunch of bogus answers, and then
d. Microsoft Peer Web Services
e. PPTP
I said Peer Web Service, but I am not sure.
Nothing on ARC conventions.
Nothing on /ox or setup disks.
Nothing on Last Known Good
Nothing on "The file has read only, the directory has Change, what is the effective permission". None of that.
"You have a PC with 16 MEGs for RAM, 1 hard disc, blah blah blah, your performance is slowing. You are getting excessive page faults. Your disk utilization is averaging 92%. What can you do that will make the MOST IMPROVEMENT? Choose one.
Two of the choices were"
c. reconfigure with 2 processors
d. add more RAM
Now, I have heard & read that if the disk utilization average is over 80, add a processor. But you also have paging problems. And I have heard & read that adding RAM will almost always do you the most good & solve a lot of your problems. And there was only 16 MEG in the machine,
These are the questions I remember form the Workstation test:
How do you trap packets of TCP/IP?
A. Network Monitor
B. SNMP
C. TCP/IP
D. Streams Monitoring
Ans. B (SNMP with trap and TCP/IP)
NT Workstation is member of workgroup. You want to map network driver on your computer to a NT Server in the Corp domain. The guest accounts disable in the Corp domain. ( 2 selection )
a. logon to your NTWS by using a user name from the Corp domain.
b. logon to NTWS by the same user name you use to access to the NT Server.
c. Select Corp domain from logon dialog box.
d. Select connect as is the map network drive dialog box.
Ans : A, D
Client service for Netware :
a. allow Netware client to use share directory and printer on NT Workstation.
b. connect volumes or directory on Netware.
c. connect printer queues on Netware.
d. connect Netware 4.1 volume on server that do not run bindery emulation.
e. Run Netware 3.1 syscon utility from NTWS.
f. Function as gateway to NTWS for them NTWS that do not have CSNW installed.
Ans : b,c,d, e
21. How do you start the backup program in a minimized window with low priority?
a. start /min /low ntbackup.
b. Cmd /min /low ntbackup.
c. Net start /min /low ntbackup
d Bat /min /low ntbackup
Ans. A
HP printer on network with NT. What protocal do you need install ?
Ans : DLC
Know VDM and memory space for 16 bit applications!!! There is a question
25. You want install NTWS without user intervention. You run winnt.exe /u What additional file must you use ?
a. UDF
b. unattend.txt
c. setup.exe
d. setup.inf
Ans : b
You want to automate the installation of 20 laptops and 50 PCs.
Required: Automate the installation
Optional: Automate installation of apps Make it join a domain
Solution.
Create an answer file with the appropriate lines included to join the workgroup for both platforms. Create a udf file. Use sysdiff to make a difference file. Apply the difference file. Blah blah
A. The solution produces the required result and both optional choices.
B. The solution produces the required result and only one of the optional choices
C. The solution produces the required result and none of the optional choices.
D. The solution produces none of the required nor optional choices.
Ans. B(Notice it has workgroup instead of domain)
--------------------------------------------------------------------
1) A question about a user named Bruce O. who has an NT and novell account, basically testing if you knew to setup a preferred server for him
since the novell server he was trying to get to was 3.x
2) That TSR question, only it said something about the TSR controls com ports. The possible answers were like in it's own VDM, in the autoexec.nt or before NT loads.
3 & 4) I had 2 scenarios on the four 2GB drives that need to be optimized.
In one case they tried that volume set trick
5) The multilink 3 modem question where the admin has put callback security on.
6) The group system policy question where 3 people don't seem to get the policy. Testing if you know individual policies take precedence.
7) Question on where in Control Panel you install a tape drive device.
8) Question on where in Control Panel you install an audio card.
9) Question on which utility you use to search for a registry key
10) That question about mapping to sales.datum.com
11) Question about what does running a 16 but in its own space allow you to do. Choices like preemptively multitask.
12) The automated install files needed question. unattend.txt, UDF but do you pick sysdiff or setup.inf. I think sysdiff since the INF file if you create it can be named anything, you don't really know what "setup.inf" is, whereas you know sysdiff, is sysdiff.
--------------------------------------------------------------------
this:
- A seemingly easy question about changing your Novell password from a NT 4.0 Wkstn.(It asked to choose 2 answers)
1. use (not exact syntax) ':net password' or something.
2. use setpass from the command prompt.
3. In the Control Panel-Netwrok Option
4. Ctlr-Alt-Del -Change Passwrod.
So, you're thinking 2 and 4 right but the question specifically said from the NT Workstation. Setpass is done on the Novell server. So I choose #1. It would be worth it for you to check this out. It is very, very close to the easy question listed on this page.
1. That TSR question - I think the answer is Autoexec.bat
2. Stripe Sets - Paging File Scenario
3. ARC stuff (2 questions)
4. Real easy Policy vs. Profile stuff. know the order of precedence here M-I-G-S-P (Machine, Individual, Group, System, Profiles)
5. 3 questions on Boot.Ini or Installing or recovering (ERD)
1. You installed a new sound card which has midi function. Where would you go to configure the sound card.
A: Multimedia
2. You installed a new HP printer into your network. But you cannot see it in print manager. Why?
A: You need DLC.
3. A scenario where you have NT 3.51, Windows Wk 4.0 and Windows 95 that need to connect to a Winnt Print server how?
A: Install the print drivers for all these operating system on your print server while you are installing the printer.
4. You want to remotely monitor 3 NT Server from your NT Workstation. What is required on server.
A: You need SNMP on each of the Server.
5. You installs Client Service for NetWare on a Windows NT workstation. Which networking tasks can be performed from the computer? (Choose all that apply)
A Allow NetWare client computers to use shared directories and printers on your NT WS computer.
B Connect to volumes or directories on a NetWare Server.
C Connect to print queues on a NetWare Server.
D Connect to NetWare 4.1 volumes on servers that do not run bindery emulation
E Run the NetWare 3.12 syscon utility from your Windows NT WS computer.
F Run NetWare login scripts during the logon process.
G Function as a Gateway to the NetWare server for other Windows NT WS computers that do not have CSNW installed.
A: I selected B, C, D, E, F.
6. You installed Client Network Administration on your Windows 95 and now you want to share a CD-ROM on a Windows NT Server. How?
A: Use Server Manager.
7. You have Netware 4.X. What are the 2 ways to change passwords?
A: Use Setpass and Cntrl+Alt+Delete.
8. Some guy has roaming profiles and you set system policy. In case of a conflict which will prevail?
A: System policy.
Note. Policy over profiles
User policy over system policy
Machine policy over all.
9. You have some exhibit.
Windows Wk
Pentium 100
16 meg ram
etc
You notice processor utilization is 95% and there is excessive paging. How fix?
A: Add more RAM
10. You run 16 bit applications in its own NTVDM. What so good about it?
A: Preemptively multitasked
If it crashed it will not affect other 16 bit apps.
11. You want to replace Windows 3.51 with Windows NT Workstation 4.0 on some user computers. You want to keep all of your user and application settings. How?
A. Use NT WK 4.0 setup disk and install into same directory as NT 3.51 In NT 3.51 run winnt32.exe.
12. You have several DOS program you want to run under NT. You need to run a TSR that controls the COM port for these DOS program. How do you run MS-DOS the Terminate and Stay Resident (TSR) application?
A Start it in its own NTVDM
B Start it in the default NTVDM
C Start it using Config.nt
D Start it using Autoexec.nt
Answer. I picked start it using Autoexec.nt. Somebody else says it is Start it in default NTVDM. I really don't know what since the adaptive test give no indication what you got in a particular section.
13. Your computer is running Windows NT 3.51 Workstation on an HPFS partition. You would like to upgrade to Windows NT 4.0 Workstation. How should you proceed?
Answer. Convert to NTFS and then upgrade.
14. You are printing to a NetWare printer, how do you disable the blank page at the end on each print job?
A From within CSNW, deselect add form feed
B From GSNW, deselect add form feed
C From Print Manager, disable form feed
Answer: A
15. Last but not least some scenario question
Situation: You have to install 100 desktops and 50 laptops.
Required result: To automate the installation of NT Workstation on all computers.
Optional results: You want all computers to join the CORP domain.
Automate the installation of applications on all computers.
Proposed solution: Create 2 unattend.txt file one for each hardware platform and have lines in it that will allow it to join the CORP domain.
Create 1 UDF with unique hardware configuration for each system
Use the 2 unattend.txt file and UDF to do automated install of the computer.
Use Windiff to automate application install.
The solution produces:
A The required result and 2 of the optional results.
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results.
I chose B. Since the 2 unattend.txt and 1 UDF files is there and command to join domain is there. But since WINDIFF then you can't install apps automatically.
--------------------------------------------------------------------
I did want to pass on two questions that I had on my exam but hadn't seen before:
1) my NT workstation is a member of a workgroup, and I want to map a drive to a share on a domain server. the question asked for two answers, neither of which was to join the domain. the answers were:
a. use a domain login at my workstation
b. use a login at my workstation that I use to login to the server locally
c. use the "connect as" option in the "map a drive" menu
d. use domain name in the drop down bar on the login screen
Notice that all three login options make assumptions about the login accounts. I chose a and c.
2) Joe Shmoe changes his display settings and when he clicks the "test" button, his display goes black for a few seconds. What setting is most likely to be incorrect?
a. adapter type
b. refresh rate
c. color palette
d. font setting
from what I understand, any of them (except d) COULD cause the problem,
but which is most likely? I chose a.
--------------------------------------------------------------------
You install CSNW on NTWS. What can you do?
a. Allow Netware clients to access files and printers on your computer.
b. Connect to shared directories on a Netware server.
c. Connect to print queues on a Netware Server.
d. Run the SYSCON program on a Netware 3.12 server.
e. Run login script from Netware server.
f. Attach to a Netware 4.x server using NDS.
g. Allow other Microsoft users to attach to Netware through your computer.
b,c,d,e,f are correct.
--------------------------------------------------------------------
Be careful, Microsoft tries to stick in Workgroup instead of Domain when doing required results questions.
Only Two RAS questions.
5 permission questions.
Anyway here's what I remember from it.
Meng is a member of Webusers group and Webserver group. Webusers group has Change access to XX folder. Webserver group has read only access to XX. What are Meng's access rights to xx?
A. Change
B. Read Only
C. Full Controll
D. No Access
Ans : A (Rights are cumulative with highest one rewarded except for No Access of course)
2. A blah blah research Labaratory is used by Karin, George, Pat. Store data on Lab1 is the Lab Experiment folder and its subfolders : Result 1, Result
2, Result 3. The users local group Everyone has Full Control permission for the entire folder. Suzanne wants to move data in folder name Research from her computer to the Lab Experiment folder on Lab1 other users with read only access
3. HP printer on network with NT. What protocal do you need install ?
Ans : DLC
Next Two, deifinitely EXPECT TO BE IN THERE
4. You're the Adminstrator of XYZ company. You check the security log and notice 100 attempts on each users login all within a minute of each other.
How can prevent hackers from guessing users passwords from within the User Manager Account Policy menu?
A. select the Account lockout radio button.
B. Set the password expiration on the spin box
C. Set the password uniqueness on the spin box
D. Set the minimum password length.
Ans. A (Lock out after a certain number of attempts.
5. How do you print to a TCP/IP printer?
A. Host name and printer name
B. Hostname and IP address
C. Printer name and IP address
D. Printer name and Host name
Ans. C
6. You belong to both Webmaster : Read permission and Webdesigner : No Access permission on same folder. What permission you have :
A. Change
B. Full Control
C. Read
D. No Access
Ans. D ( no access overrides all)
7. How do you trap packets of TCP/IP?
A. Network Monitor
B. SNMP
C. TCP/IP
D. Streams Monitoring
Ans. B (SNMP with trap and TCP/IP)
8. NT Workstation is member of workgroup. You want to map network driver on your computer to a NT Server in the Corp domain. The guest accounts disable in the Corp domain. ( 2 selection )
a. logon to your NTWS by using a user name from the Corp domain.
b. logon to NTWS by the same user name you use to access to the NT Server.
c. Select Corp domain from logon dialog box.
d. Select connect as is the map network drive dialog box.
Ans : A, D (C Wrong because only one domain allowed per config, must change via network properties in Control Panel. B wrong because NT Server access not the same as Corp Domain access)
9. Client service for Netware :
a. allow Netware client to use share directory and printer on NT Workstation.
b. connect volumes or directory on Netware.
c. connect printer queues on Netware.
d. connect Netware 4.1 volume on server that do not run bindery emulation.
e. Run Netware 3.1 syscon utility from NTWS.
f. Function as gateway to NTWS for them NTWS that do not have CSNW installed.
Ans : b,c,d, e
10. NT workstation needs access NT server and Netware server on network.
What must you install on NT Workstation ( select 2 )
a. DLC
b. TCP/IP
c. NetBUEI
d. SAP agent.
e. CSNW.
f. NWlink IPX/SPX compatable Tranport.
g. PPTP.
Ans : e,f
11. How do you start the backup program in a minimized window with low priority?
a. start /min /low ntbackup.
b. Cmd /min /low ntbackup.
c. Net start /min /low ntbackup
d. Bat /min /low ntbackup
Ans. A
12. Several MS-DOS Share TSR program be loaded :
A Start it in its own NTVDM
B Start it in the default NTVDM
C Start it using Config.nt
D Start it using Autoexec.nt
Ans: D
--------------------------------------------------------------------
1. How do you start the command "ntbackup /r /e" with low priority?
A. Start /low ntbackup /r /e
B. Cmd /low ntbackup /r /e
C. run /low ntbackup /r /e
D. xxxxxxx
Answer A.
2. Which three files are required are required to run unatteded installation?
A. Unattend.txt
B. UDF files
C. Sysdiff.exe
D. Winnt.exe
E. Windiff.exe
Answer A,B,C
3. What must be installed to send a trap message?
A. SNMP
B. DHCP
C. Network Monitor
D. xxxxxx
Answer A.
4. The question about 3-win16 apps that use shared memory.
Answer: Run the 3 apps in the default ntvdm and run any other ones on there one ntvmd.
5. I had the question on what you can acess on a netware server when you have CSNW installed on a workstation.
6. Also the question with the question on what service needs to be installed to send TCP.IP trap messages to another computer (SNMP)
I had at least 3 or 4 quesions on profiles and such, I think this is where I went wrong since I am weak on this topic. Oh well anyway a pass is a pass.
Read Anon and James paradise these sites have the rest of the questions I had on my exam.
--------------------------------------------------------------------
1)What two things do you need to print to a TCP/IP printer on a network?
Answer: IP address and printer name.
Checked with Article ID: Q195643 on the Microsoft site
In the "Name or address of server providing lpd" field, enter the DNS name or the IP address of the host of the printer you are adding. In the "Name of Printer or Print Queue on that Server" field, type in the name of the printer as it is known by the host.
How to Remove Windows NT
Article ID: Q103049
Removing Windows NT from the Boot Sequence
Removing a Primary NTFS Partition
Removing Windows NT Files
If you want to return to your original MS-DOS configuration, boot MS-DOS and type "sys c:" (without the quotation marks). This command replaces the Windows NT boot sector with the MS-DOS boot sector, and allows your computer to boot MS-DOS. The following files are left in the root folder and can be deleted after you perform the "sys c:" operation:
Pagefile.sys
Boot.ini
Ntldr
Ntdetect.com
Ntbootdd.sys
Remove the Windows NT files.
To delete or modify a primary NTFS partition, use any of the following
methods:
Boot MS-DOS version 6.0 from a floppy disk and press RETURN to continue installing MS-DOS 6. When you are prompted to do so, choose "Remove files."
Initiate Windows NT installation from floppy disks or a CD-ROM. When you are prompted to do so, choose "P" to remove the partition.
Use the Delpart tool (Delpart.exe) to delete the NTFS partition. The Delpart tool is included with the Microsoft Windows NT 3.1 Resource Kit only. It is not included in the Windows NT 3.5, 3.51 or 4.0 Resource Kits. Note that the Delpart tool cannot delete a logical drive an extended partition.
Boot OS/2 version 1.x from a floppy disk and run its Fdisk program. To remove the partition, specify the /D option.
The information in this article applies to:
Microsoft Windows NT Operating System version 3.1
Microsoft Windows NT Advanced Server version 3.1
Microsoft Windows NT Workstation versions 3.5, 3.51, and 4.0
Microsoft Windows NT Server versions 3.5, 3.51, and 4.0
SUMMARY
This article describes how to remove Windows NT from your computer.
MORE INFORMATION
Before you begin, make sure you know where Windows NT is installed, how much of it you want to remove, and how your hard disk is partitioned and formatted. Then, go to one of the following sections:
Removing Windows NT from the Boot Sequence
Removing a Primary NTFS Partition
Removing Windows NT Files
Removing Windows NT from the Boot Sequence
There are two ways to remove the Windows NT boot sector from your computer:
If you want to return to your original MS-DOS configuration, boot MS-DOS and type "sys c:" (without the quotation marks). This command replaces the Windows NT boot sector with the MS-DOS boot sector, and allows your computer to boot MS-DOS. The following files are left in the root folder and can be deleted after you perform the "sys c:" operation:
Pagefile.sys
Boot.ini
Ntldr
Ntdetect.com
Ntbootdd.sys
NOTE: The Ntbootdd.sys file is installed only if you have a SCSI Host Adapter installed in Windows NT.
You can also start your computer with a Windows 95 bootable floppy disk and use the "sys c:" command if you want to return to your original Windows 95 configuration.
If you want to leave Ntldr on the disk, you can boot MS-DOS without being prompted by changing the startup operating system and time-out value. To do so, start the System tool in Control Panel, click the Startup/Shutdown tab,
click MS-DOS in the Startup box, and type "0" (without quotation marks) in the Show List For <n> Seconds box.
NOTE: If the primary partition was converted to NTFS, the only way to return to starting MS-DOS automatically is to reformat the drive and reinstall MS-DOS. See the next section if this is the case.
Removing a Primary NTFS Partition
In general, attempts to modify the primary, bootable NTFS partition do not succeed for the following reasons:
MS-DOS versions 5.0 and 6.0 do not recognize an NTFS partition. The MS-DOS Fdisk program reports an NTFS partition as an OS/2 high-performance file system (HPFS) partition.
You cannot modify or delete an NTFS primary partition within the partition.
To delete or modify a primary NTFS partition, use any of the following methods:
Boot MS-DOS version 6.0 from a floppy disk and press RETURN to continue installing MS-DOS 6. When you are prompted to do so, choose "Remove files."
Initiate Windows NT installation from floppy disks or a CD-ROM. When you are prompted to do so, choose "P" to remove the partition.
Use the Delpart tool (Delpart.exe) to delete the NTFS partition. The Delpart tool is included with the Microsoft Windows NT 3.1 Resource Kit only. It is not included in the Windows NT 3.5, 3.51 or 4.0 Resource Kits. Note that the Delpart tool cannot delete a logical drive an extended partition.
Boot OS/2 version 1.x from a floppy disk and run its Fdisk program. To remove the partition, specify the /D option.
Removing Windows NT Files
You can remove the following folders to remove Windows NT files and free disk space:
Users
Winnt
NOTE: The Winnt folder name may vary.
--------------------------------------------------------------------
1.What do you do if a document has become jammed in a printer?
2.How do you change a password on a NetWare Server?
3.Which takes precedence, system policy or roaming user profile?
4.You notice excessive paging, how do you correct this?
5.How do you start the command "ntbackup /r /e" with low priority?
6.You are printing to a NetWare printer, how do you disable the blank page at the end on each print job?
7.Which tool do you use to search for a value in the registry?
8.You have an NT workstation connected via the Internet to an NT Server that has a DNS name of "sales.datum.com" and a file that's named "reports". How do you map to it?
The rest were longer situation type problems (have seen them all at this site - or ones similar to them)
--------------------------------------------------------------------
1.. How do you start the command "ntbackup /r/e" minimize and low priority?
my answer: start /min /low ntbackup /r/e
2. The computer is running NT 3.51 workstation on an HPFS partition.
You would like to upgrade to windows nt4 wks How should you proceed?
my aswer: convert to NTFS then upgrade to windows nt4.0
3.What do you need to print to a TCP/IP printer?
--IP address & printer name
4.How can you dial into a RAS with 3 modems using multilink and callback security.
--cannot do, doesnt work
5.-What do you do if a document is jammed in a printer and was damaged to reprint?
--restart from the document
6.You are installing a MIDI device, which control panel applet do you use?
A. Multimedia menu
7.A system policy is implemented to a group, yet 3 users of the group do not receive the policy - why?
A. Because they have individual policies which have priority.
8.Which two utilities can you use to monitor memory utilization?
A. Task Manager and Performance monitor
9.How do you change a password on a Netware Server (chooise 2)?
A. Use setpass and CTRL-ALT-DELETE
10.The default memory for 16 bit windows applications is what?
A. separate and Shared
11.-You wish to install FTP server, what else must you install\f1
Microsoft Peer Web service
12.-Though you are installing Windows NT Workstation without a Network Interface Card (which will arrive later), you still want to have network protocols installed and configured in advance.
A: select loop-back adapter and bind protocols to it
13.Situation (Long): You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum speed of access to its local (mainly graphic data) files for other computers in the same LAN. You have there a SCSI controller with 4 disks of 2 GB each. You
Required result: To optimize performance for optimum speed of access to local data files.
Optional results: Reconfigure for optimum speed of access to paging file.
Optimize network access performance.
Proposed solution:
Configure the first hard disk as boot partition. Configure the other 3 disks as a strip Set. Use NTFS on all partitions. Place data on the strip Set.
Place paging file strip Set. Configure order of protocols at bottom
The solution produces:
[ ] The required result and 2 of the optional results.
[ x] The required result and 1 of the optional results.
[ ] The required result and none of the optional results.
[ ] None of the required results.
14.Having an NT Workstation 3.51 Intel 386 33 MHz CPU 16 MB RAM, you want to upgrade it to NT Workstation 4.0 with the same settings as in the3.51 version. What to do?
Answer: you cannot upgrade it, you need at least an Intel 486 to do it
15.You are the administrator of a Windows NT Workstation computer that is used by three people. The users work different shifts in a facility that handles confidential information. The users want to maintain the security of their own files. They also want to customize their won Windows NT Workstation desktop environment, including screen colors and program groups. Which three steps must you take?
A:Create a user account for each user. Create a home directory for each user on a NTFS partition. Ensure the directory permission are configured so that users have exclusive access to their own home directory.
--------------------------------------------------------------------
1. Scenero: Want to automate the installation of 20 laptops and 50 pcs.
Required: Automate the installations
Optional: Automate installion of applications Make it join a domain.
Solution: Have 2 unattended files, join the domain and use Windiff to make the difference to install the application.
2. How do you print to a TCP/IP printer?
3. How do you send trap packets of TCP/IP.
4. Want to allow the user of Wstation to view the event viewers of security log??
5. How do you run an MS-DOS, terminate and stay resident (TSR) application?
6. You are planning to install NT workstation with 5 applications on 200 intel
PCs. All PCs already have the same papplications and same hardware installed. You will install over the network with an NT server as the source of installation. Which 3 files??
7. Your print device becomes jammed while printing a document, and your application can't reprint the document. After you resolve the jamming of the paper, what would you do to successfully print the document that was damaged??
8. The multilink option enabled for three modem on your WKST. You decided to enable callback security on RAS server. Can you do it???
9. Change the password on a Netware 4.x server using CSNW? Choose two.
10 You are the admin of WIn NT WS that is used by 3 people. The uers work different shifts in a facility that handles confidential onformation. THe users want to maintain the security of their own files. Choose three??
11. How do you start the command ntbackup /r /e with low priority?
12. Scerino: Plan to reconfig an NT WS with 32 MB .......... for opt speed for local files . 4 disk formated as FAT..
Required: To opt performance for opt speed access to local data files.
OPtional: To opt speed of access of paging files To opt network access place pagefile on boot part.
Solution: Config the first hard disk as boot part Config the other 3 disk as volumn set using fat
Move the least use protocol at the top.
13. You are installing MIDI device, which control panel applet do u use?
14. Which 2 NT WS utility are available for monitoring process utilization?
That's it.... 1 question I forgot....
--------------------------------------------------------------------
01. Standard upgrade question from NT Workstation 3.51 with one HPFS partition procedure to 4.0. Transcenders specifies retention of shares and permissions.
Question on MCP test does not mention permissions or shares at all. It doesnt even specify retention of files so I guess a FAT file system would be an option. I still chose the Convert to NTFS and then upgrade Option. Maybe right???
02. (Real Dinger) Severe variation of Change password on Netware 4.0 Server question. It wanted TWO methods of changing password Obvious choice of CTRL+ALT+DEL method was one. Other choices included starting with network icon in Control Panel, Set Pass?? utility from command line and another command line option that started with Net ____ ______. there was another possible choice that I cannot even remember. You will have to research this one for yourself.
03. You have installed TCP-IP and you want to install FTP (Server?). What other protocol or service must you install? Some of the choices were PPP, PPTP, (Simple?) TCP-IP. Look this one up for youself too. I am going to as soon as I finish this.
(XXXXX?) means I cannot be sure of the exact wording or spelling on the test.
--------------------------------------------------------------------
Which control panel applet is used to configure modems?
A Modem applet
B Devices applet
C Services applet
D Adapter in network applet
E Dial-up applet
Answer: A
You are installing NT and testing the monitor type and the screen goes black. When you reboot you are put back into the monitor type selection screen. What is the problem?
A Refresh rate
B Resolution
C Monitor type
D Color depth
Answer: C
What two things do you need to print to a TCP/IP printer on a network?
A Hostname + IP-address
B Hostname + subnetmask
C IP-address + printername
D Printername + hostname
Answer: C
What is needed to print to a HP printer on the network?
A DLC protocol
Given the scenario whereby NT 3.5.1 workstation and Windows95 computers need to connect to NT workstation 4.0 print server for printing.
Answer: Choose all 3 different printer drivers need to be installed on your print server computer (workstation 4.0).
What protocol/service do you need to send TCP/IP trap messages to another computer?
A SNMP
B Simple TCP/IP services
C NWlink
D Network monitor agent
E DHCP
Answer: A
What do you need to monitor Ethernet packet statistics?
A Network Monitor Agent
What is required to use performance monitor to monitor your network segment?
A Enable the Network Monitor Agent
You want to install NT Workstation from CD-ROM. MS-DOS can access the CD-ROM but not by NT Workstation.
How would you install NT Workstation?
A Start from MS-DOS and run WINNT.EXE from the CD-ROM.
*Incorrect choices include using winnt32.exe
You are installing NT from a CD. After first reboot while trying to install a driver
you get the following error message: "Copy Single File: Non-critical error could not copy file". What is the problem?
A Your hard drive failed
B The file already exists on the hard drive
C The CD-ROM is not compatible with NT / is not on the HCL list
D The hard drive has conflicting interrupts with another device
You have a computer with a NIC at the office and a modem when you take it home.
How would you configure it?
A 2 different hardware profiles
What do you do if a document is jammed in a printer and was too damaged to reprint?
(Doc are not listed in spooler - if docs weren't damaged, you could stop and restart the spooler service).
A Restart from the document menu
Windows NT will boot on your computer with a boot disk, but not on Bill's computer.
What is the problem?
A Change the ARC naming in the boot.ini file to the proper partition
Robert installs Client Service for NetWare on his Windows NT workstation. Which networking tasks can he perform from the computer? (Choose all that apply)
A Allow NetWare client computers to use shared directories and printers on your NTWS computer.
B Connect to volumes or directories on a NetWare Server.
C Connect to print queues on a NetWare Server.
D Connect to NetWare 4.1 volumes on servers that do not run bindery emulation
E Run the NetWare 3.12 syscon utility from your Windows NT WS computer.
F Run NetWare login scripts during the logon process.
G Function as a Gateway to the NetWare server for other Windows NT WS computers that do not have CSNW installed.
Note: A Can't be done unless FPNW has been installed.
F Just mark the checkbox in CSNW applet, and you can run NetWare login scripts
*There is some debate over answer D. I didn't get this question on the test, but I say D is correct, because NT4 is able to work in either the NDS environment
(NetWare 4.x, no bindery emulation) OR with NetWare 3.x (which does use bindery emulation)
.Mixed NT and NW environment, which of the following protocols must be installed on the NT workstation in order to access resources on the NW server and the NT server?
A CSNW
B GSNW
C FPNW
D NWLINK
E TCP/IP
F DSNW
G NetBEUI
Note: Watch out for the word protocol. CSNW and GSNW aren't protocols!
Also, remember that with only NWLink, your NT client can still access client/server apps on the NW server, without CSNW being installed. Installing CSNW enables your NT client to access file and print shares on the NW server.
Answer: D
You install Dial-Up Networking with all default options. You create a phonebook entry to dial your Internet service provider. What is the source of an IP address for your modem? (Choose one)
A Your computer will use the IP address currently assigned to it.
B Your computer will allocate an IP address from the local DHCP server
C Your computer will request an IP address from your Internet service providers PPP-server.
Answer: C
How should you use an unattended.txt file (answer file) during the automated installation of a Windows NT Workstation on 100 identical new computers?
(Chooseone)
A To provide hardware-specific configuration information and other configuration data for the computers.
B To provide user account information, a unique computer name, and a unique identifier specific to each computer.
C To automate installation of applications on the computers during the installation of WinNT WS.
D To place application specific registry data into the registry on each computer including serialization and registration data.
Answer: A Remember, answer file is for config and hardware, Sysdiff is for apps
You install a tape backup device that uses the Enhanced IDE interface In which dialog box from the control panel must you install the tape backup device driver?
(Choose one)
A SCSI adapters
B Devices
C System Properties
D Tape Devices
Answer: D Tip - Learn the names of the icons in Control Panel! Many questions are dead giveaways if you know this, even if you don't know why. Incorrect choices on this sort of question are usually items/icons that don't exist!!
Peter Smith wants to install Windows NT Workstation without user invention. He plans to do this by running winnt.exe with the /u switch. Which additional file must he use? (Choose one)
A Uniqueness database file (UDF).
B An unattended.txt file (answer file).
C A customized setup.sif file.
D A customized setup.inf file.
Answer: B
You suspect that someone is gaining unauthorized access to the computers on your network. You enable auditing of user login events. When you look at the Eventviewer security log three days later, you see that every account has more than 100 failed logon attempts before each successful logon. You also note that all the logon attempts on each account occurred within one minute.
You want to prevent further unauthorized logons. What must you do in the Account Policy dialog box? (Choose one)
A Select the Account lockout radio button.
B Set a value in the spin control in the Maximum Password Age group.
C Set a value in the spin control in the Minimum Password Age group.
D Set the spin box control in the Password Uniqueness group to remember the 10 last passwords.
Answer: A
You want to send a document from your Windows NT workstation computer to a printer that is located on another Windows NT WS computer. You want to do this without permanently installing drivers for that printer on your hard disk. What should you do? (Choose one)
A Use "net print" to send the document to the printer.
B Drag and drop the document file onto the printer in Windows NT explorer.
C Use Windows NT Explorer to temporarily capture the printer, and then send the document to the printer.
D Use the Add Printer Wizard to temporarily connect to the printer, and then send the document to the printer.
Answer: B
You wish a user to be able to view Event Viewer, how can you achieve this?
A Only Administrators can view Event Viewer, so add user to Administrators group You are installing a MIDI device, which control panel applet do you use?
A Multimedia (Again, know those Control Panel icons!)
How do you lock your workstation if you leave it for more than 30 minutes?
A Use password protected screensaver.
User wants to print large print jobs after hours, how can this be done?
Note: This question will either request the option to print after hours, or require users to print after hours. Two different answers! Make sure if question requires the option, you give users the option, and vice versa.
A Create two printers and give one the option to print after hours.
What protocol do you need to connect to a MAC printer?
A AppleTalk
What is the smallest activity that can be scheduled by the processor / microkernel?
A Thread
What is the smallest unit handled by the scheduler service?
A Process
A user who is a member of the users group wishes to share a file on his workstation,
how can he do this?
A Log on as administrator and share the directory using Explorer.
How can a workstation join a domain during installation?
A You must have the domain administrator name and password. (Not just of the workstation admin)
The NT Workstation Administrator password was lost. What will happen after restoring with an Emergency Repair Disk (ERD)?
Accounts and security will be restored to as they were the last time the ERD was updated. After restarting Windows NT Workstation, monitors shows a blank blue screen without text and the computer stops responding. You discover that an incorrect driver was just installed. What should you do to correct the problem?
A Call the manufacturer to request an NT compatible driver
B Use the Last Known Good Configuration to restart your system and correct the problem.
C Use the emergency repair disk
Answer: B Remember: If it's recent changes to the machine that caused the problem,
you can usually fix it with LKGC.
How do you change a password on a NetWare Server?
A Use setpass for 3.51 and CTRL-ALT-DELETE for 4.x (NDS)
What is required to have TCP/IP addressing assigned automatically?
A Use DHCP
Which takes precedence, system policy or roaming user profile?
A System policy
*Policies over Profiles.
User Policy over Group Policy.
Machine/System Policy over all.
Which application creates user accounts?
A User manager
The default memory for 16 bit windows applications is what?
A Shared
* DOS apps run in their own VDM's by default. 16bit apps run in ONE VDM by default
(shared).
You notice excessive paging, how do you correct this?
A Add more RAM
B Add a second processor
C Increase the size of the paging file
D Decrease the size of the paging file
E Create a second paging file
Answer: A
Startup fails; you suspect a problem in the boot sector what should you do?
A Use 3 startup disks and select repair
*Key here is that the problem is in the boot sector. Boot sector corruption can be repaired by the 'repair' option in install.
You have an NT Workstation with TCP/IP installed and you want it to become an FTP server. What protocol or service do you need?
A PWS (Peer Web Services)
B simple TCP/IP services
Answer: A
Which service translates URL to IP?
A DNS
What does WINS do?
A Translates NetBIOS names to IP addresses.
*Remember that WINS is specific to Microsoft, and DNS can be used with UNIX boxes.
You want to set the boot delay time to 10 seconds. How should you proceed?
Choose all that apply
A Edit Boot.ini to set timeout to 10 seconds
B Use Control Panel | System Properties | Startup - Shutdown tab
C Use system properties
D Edit HKEY_CONFIG in the registry
Answer: A, B
You want to replace Windows 95 by Windows NT Workstation 4.0 on some user computers. They all want to keep their Windows 95 desktop settings and all their applications. How should you proceed?
A Run Winnt.exe and Install Windows NT in the same directory as Windows 95
B Run Winnt32.exe and install Windows NT in the same directory as Windows 95
C Run Winnt.exe and install Windows NT in a separate directory, reinstall all the applications and reconfigure user environment under Windows NT, then remove Windows 95
D Can't be done because Windows 95 and Windows NT have different registry configurations.
Answer: C
*Remember that there really is no way to 'upgrade' from Win95 and save all user settings. Win 3.x and earlier versions of NT can be upgraded.
How do you run an MS-DOS, Terminate and Stay Resident (TSR) application?
A Start it in its own NTVDM
B Start it in the default NTVDM
C Start it using Config.nt
D Start it using Autoexec.nt
Note: MS-DOS applications run by default in their own NTVDM
Win 16 applications run by default in ONE NTVDM (so they can share memory)
Answer A suggests you should check the "run in separate memory" checkbox.
But an MS-DOS application runs by default in separate memory.
Answer: B
You want to run Win16 applications under NT Workstation. Where would these run by default?
In a single NT Virtual DOS Machine (NTVDM). ("a" single VDM, not separate VDM's. All are in ONE VDM.)
You are running 16-bit Windows applications. The 3 applications share information.
However one of these applications is faulty. How do you run the applications without effecting the other 16-bit Windows applications?
A Run the 3 applications in the default configuration (which is shared memory) and the remainder in their own NTVDM's
How do you start the command "ntbackup /r /e" with low priority?
A Start /low ntbackup /r /e
B Cmd /low ntbackup /r /e
C run /low ntbackup /r /e
Answer: A
*You may see this question ask for low and minimized... in which case it would be start /min /low ntbackup /r /e
What would you enable to record a memory dump following an application failure?
You are supposed to place a target with crosshairs on the correct area
A Create crash dump file On Dr. Watson window
Which utility do you use to record memory dump following an application failure?
A Dr. Watson
B Windows NT System properties setting
Answer: A
Note: Remember application crash dumps are done in Dr. Watson, system stop errors and memory dumps are done in FAULTLOG on the startup/shutdown menu.
You have a computer that dual boots from NT Workstation or MS-DOS using FAT in all partitions. You decide to remove NT Workstation and use MS-DOS only. What to do?
A Boot from DOS, run SYS.COM, delete all NT Workstation files
Note: For the same question on a machine with only NT, using NTFS, use FDISK
Your computer runs only Windows NT Workstation on an NTFS partition.
You would like to remove Windows NT and run MS-DOS. How would you do it?
A Run Sys.com
B Use convert.exe to convert the partitions to FAT, then run Sys.com
C Use Rollback.exe to restore MS-DOS
D use fdisk.exe to remove all the partitions, then use the MS-DOS setup disks to reinstall MS-DOS
Answer: D
Your computer is running Windows NT 3.51 Workstation on an HPFS partition. You would like to upgrade to Windows NT 4.0 Workstation. How should you proceed?
A Run winnt.exe and install Windows NT 4.0 in the same directory
B Run winnt32.exe and install Windows NT 4.0 in the same directory
C Convert to NTFS, then upgrade to Windows NT 4.0
Answer: C
Your computer is setup to dual boot MS-DOS and Windows NT 4.0 Workstation. When you select to boot MS-DOS from the boot menu, DOS doesn't start and you get an error message "No system disk error". What do you suspect is the problem?
A The BOOT.INI file is corrupted
B The NTLDR file is corrupted or missing
C The BOOTSECT.DOS file is corrupted or missing
Answer: C
You are printing to a NetWare printer, how do you disable the blank page at the end on each print job?
A From within CSNW, deselect add form feed
B From GSNW, deselect add form feed
C From Print Manager, disable form feed
Answer: A
*Note that if the blank page contains only your user name, etc, that is a banner page, not a form feed!
Which three files are required are required to run unattended installations?
A Unattend.txt
B UDF files
C Sysdiff.exe
D Winnt.exe
E Windiff.exe
Answer: A, B, C
You are planing to install NT Workstation with 5 applications on 200 Intel PCs. All PCs already have the same hardware and the same applications installed. You will install over the network with an NT Server as the source of installation. Which 3 files A UNATTEND.TXT (answer file)
B SETUP.INF
C SYSDIFF.EXE
D UDF
Answer: A, B, C. Check this answer. For some reason, I don't agree, I'd say stick with the usual,
but I can't find a definite answer either way. I did get one question wrong in this section on my test, and it was probably because I stuck with the usual three instead of choosing the INF file, but still, look it up!
Which tools do you use to search for a value in the registry?
A REGEDIT.EXE
B REGEDT32.EXE
C Registry Editor
Answer: A
* The main difference between regedit and regedit32 is that 32 can only search for keys in the registry, and regedit can search for strings, values, etc
What do you need to have installed in your NT Workstation in order to change the password for a NetWare user?
A CSNW
B GSNW
C NWlink
D IPX/SPX
E FPNW
Answer A (check on this one too)
You have an NT Workstation connected to 2 routers, you want the NT Workstation to be able to route, which of the following do you have to install:
A IP
B Subnetmask
C Default Gateway
D DHCP
Answer: A, B, C
*Note, if not routed, all you need is IP and subnet mask.
You have an NT Workstation connected via Internet to an NT Server that has a DNS name of "sales.datum.com" and a printer with the name "reports". How do you refer to the resource in order to map it?
A \sales.datum.com
You have 2 ISDN adapters with 2 B-channels each on your NT Workstation. Each channel has its own phone number. You are connected via RAS to an NT Server with the same configuration. How do you configure RAS connecting with 2 ISDN lines each having 2 B channels?
A Create one phone book entry with 4 numbers
You want an NT Workstation to dial-up to a PPP Server, and after login into the PPP Server you need to activate a Menu automatically for that user account.
A Create a script to run after dialing
You want to run some accounting applications at a higher priority without interfering with the operating system or any of its services. Which process priority class should you use for the accounting applications?
A High.
Though you are installing Windows NT Workstation without a Network Interface Card
(which will arrive later), you still want to have network protocols installed and configured in advance.
A. Select loop-back adapter and bind protocols to it.
You need an NT Workstation user to examine the Event Viewer Security Log. How should you configure his/her account?
A Make him/her a member of the Administrator Group on that NT Workstation.
A week ago success and failure print auditing was configured for the Everyone special group on a NT Workstation printer. Since then, about 300 documents have been printed, but no events were logged. What success/failure audit should you enable?
A In user manager enable auditing of File and Object Access
You have Multi-Link enabled for 3 modems on NT Workstation. An NT Server is configured for callback security. How does NT Workstation Dial-Up Networking affects access to the NT Server?
A Can not use Multi-Link protocol with this NT Server.
Callback won't work with multilink!!!
Which 2 NT Workstation utilities are available for monitoring processor utilization?
A Performance Monitor
B Task Manager.
Answer: A, B
Which two utilities can you use to monitor memory utilization?
A Task Manager and Performance monitor
Situation (Long): You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum speed of access to its local (mainly graphic data) files, varying in size from 1MB to 10MB, for other computers in the same LAN. You have there a SCSI controller with 4 disks of 2 GB each, formatted with FAT.
Required result: To optimize performance for optimum speed of access to local data files.
Optional results: Reconfigure for optimum speed of access to paging file. Optimize network access performance.
Proposed solution: Configure the first hard disk as boot partition. Configure the other 3 disks as a Volume Set. Use FAT on all partitions. Place data on the Volume Set. Place paging file on the boot partition. Configure binding order of protocols; move most used protocols to the bottom of binding order. The solution
produces:
A The required result and 2 of the optional results.
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results.
Note: Volume sets DO NOT speed up disk access.
Tip - read the required result, then read the proposed solution. If the required result is not met, you've saved yourself a lot of reading and time.
Answer: D
You have to administer 90 NT Workstations. Accounts are maintained by a PDC that is the only server on the network. Users log on using accounts from the domain. You want to implement restrictions on the NT Workstations so that the "Shut Down"option is disabled in the login dialog box. Least administrative effort.
A Use a system policy
B Change the registry value of ShutDownWithoutLogon from 1 to 0.
Answer: A Both will work, but A if least administrative effort.
You want to disable the Shutdown command from the Login Box. How to do this with a minimum of administrative effort!
A Create a system policy and save it in the Netlogon directory
B Use Regedt32.exe
Note: watch for the word minimum. You can accomplish it with both options
You are the administrator of the CORP Domain. You create a System Policy for the Domain Users Global Group, however Policy is not taking effect for 3 users. What ishappening?
A They have individual system policies which override group policies.
The Administrator is going to leave the company (for good) and one NT Workstation has implemented confidential information access as a per file and per user basis. You want a new user Barbara to take over the administration duties.
A Rename Administrator account
Having an NT Workstation 3.51 Intel 386 33 MHz CPU 16 MB RAM, you want to upgrade it to NT Workstation 4.0 with the same settings as in the 3.51 version. What to do?
A You cannot upgrade it; you need at least an Intel 486 to do it.
You have an NT 3.51 member server of DOMAIN1, now you also want the same computer to dual boot also as an NT Workstation 4.0 sometimes. What to do?
A Install NT Workstation 4.0 in its own separate directory (not in the same of NT Server 3.51).
You need to install UPS that is listed in the HCL for your Windows NT Workstation What are the 2 steps to install it?
A. Connect UPS to any serial port with a pin that meets the UPS connection requirements.
B Use the UPS dialog box from the Control Panel
Answer: A, B.
You require a Windows NT Workstation to become a member of the CORP domain. What should you do?
A Control Panel, Network, Identification
You want to move an NT Workstation from DOMAIN1 to DOMAIN2 not changing any other settings. What to do?
A Control Panel, Network, Identification
* Same as above - this is how you change domains!!!
Your computer is member of a workgroup. You want to map a network drive to a share on a server PDC in the XYZ domain. The server has had the guest account disabled. Choose two options.
A Log on to your workstation using your domain user account
B Log on to your workstation using the account of a domain member
C In the log on box choose the domain name
D In the map network drive box in explorer choose "log on using account" option
E In the map network drive box in explorer choose "connect as" option
Answer: A, E (FYI I didn't look this one up, so you may want to check it out yourself).
Why would you use SYSDIFF.EXE on an NT Workstation to setup other 300 identical computers with the same applications?
A to automate installation of applications during the installation of the 300 NT workstations. (Instead of configuration of hardware)
It is necessary to install NT Workstation with a set of applications over 100 identical new computers and you want to automatically install all applications. What to do?
A Install first NT Workstation, run sysdiff /snap, install apps, run sysdiff /diff to create the difference file. Install to rest and apply diff file.
What to do in order to add a path to an environment variable for a user application?
A Control Panel, System, Environment, User Environment
Every time that you use Dial-Up Networking to connect to a Remote Server, the computer disconnects after 3 seconds. What to do in order to trace the problem?
A User Dial-Up Networking Monitor dialog before you dial.
B Record a log file check box in Advanced connection settings dialog box
Answer: A
Situation (Long): You have to install 30 desktops and 50 laptops.
Required result: To automate the installation of NT Workstation on all computers.
Optional results: You want all computers to join the CORP domain. Automate the installation of applications on all computers.
Proposed solution: Create 1 SETUP.INF for all computers. Create 1 UDF with unique hardware configuration for each type of computer. Install NT Workstation on 1 type of computer, run sysdiff /snap, install suite of applications, run sysdiff /diff, use unatttend.txt.
The solution produces:
A The required result and 2 of the optional results.
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results.
Note: They use UDF to specify hardware differences. UDF can only be used to change statements from Unattend.txt. Because there are 2 different types of computers (desktops, laptops) you need to create 2 Unattend.txt files
Answer: D
BruceO has an account on a NetWare Server 3.12-named Accounting and an account BruceO on his NT workstation 4.0. How do you configure CSNW on his workstation?
A. Preferred server Accounting
B Preferred server BruceO.Accounting
C Tree Accounting
D Tree NetWare
Answer: A
* NetWare 3.x (bindery emulation) = Preferred Server
NetWare 4.x (NDS) = Default tree and context
You want to use Dial-Up-Networking to connect to workstation to a PPP server. Your Internet Service Provider requires you to log on to a server and select a menu option that activates PPP on the server. How do you do this?
A Create a script file
B Configure Dial-Up-Networking to open a terminal window after dialing
C Configure Dial-Up-Networking to open a terminal window before dialing
D NT 4.0 does not support this kind of Internet Service Provider.
Know your rights and effective permissions! Remember: Remote (share) = most restrictive. No Access Rules Over All. Local (at workstation) = least restrictive
You are creating and sharing a new printer on your NT workstation 4.0 Users of Windows 95, workstation 3.5.1 and workstation 4.0 will also use this printer. You need to install printer drivers. What should you do to accomplish this with a minimum of administrative effort?
A Install appropriate drivers on every computer?
B Install 4.0 drivers on your computer Install 3.5.1 drivers on workstation 3.5.1 computers Install Windows 95 drivers on Windows 95 computers
C Install workstation 4.0 and 3.5.1 drivers on your computer Install Windows 95 drivers on Windows 95 computer
D Install 4.0, 3.5.1 and Windows 95 drivers on your computer
Answer: D
How do you automatically assign IP's?
DHCP
Boot error - NTOSKRNL is missing or corrupt. Fix?
Edit ARC path in boot.ini, or use ERD to repair
Boot error - NTLDR is missing. Fix?
If there's a non-system floppy in the drive, eject it and reboot.
If boot.ini is not present, replace it from a backup or use ERD to repair.
If NTLDR is actually missing or damaged, repair from ERD.
Boot error - NTDETECT keeps repeating. Fix?
Must use ERD to repair.
You administer a workstation used by three people who want their own desktop envioronment, and must maintain security of their own files. 3 steps?
Create user - Create home directories for each user on NTFS partition - Set permissions
(Incorrect option includes 'create a unique profile for each user' instead of 'create unique user accounts')
Long scenario involving a vice president with a new computer. He must join the CORP domain. Proposed solution says to join the CORP workgroup. This blows the installation - does not meet required. Keep your eyes open for it. One word usually makes the difference. Remember, to monitor packets or use Performance Monitory, you need the Network Monitor Agent enabled!
For all unattended install questions, beware of the "Windiff" option. No such thing! It's sysdiff. If a file is moved within the same partition - what happens to compression attributes?
Same as permissions - move in same partition = retains it's attributes, move across partitions = inherits attributes of parent, copy anywhere = inherit.
Files needed to make a boot disk - Ntldr, Ntdetect, boot.ini, Ntbootdd.sys (for SCSI with bios disabled)
Account policy specifies max password age is 60 days. You later create a new user account and check the 'password never expires' box. What happens?
Password will never expire.
置悦税 庚薦 (99-4 杉切 庚薦)
Subject : 70-073 Windows NT Workstation 4.0
Type : Adaptive
Passing Score : 547
My Score : 740
I appeared for this exam last week (1st April '99), this is the first of mine in MCSE track. I would like to tell my thanks to all those who posted their valuable Brain dumps, especially Ms. Pavithra & Mr. Sam (I got 5 to 6 Q's from their Brain dumps) and thanks to the BrainMasters for maintaining this site. I got 15 Q's in my exam, almost 70% of the Q's which are available in Brain dumps, but before going to exam I didn't confirm all the answers, so I guess I got 4 wrong answers out of 15 Q's, anyway this site is of great help. So, please make sure & confirm the answers before going to exam.
I want to contribute some of the Q's, which I remember and also some are available in this site.
1. "xyz" has some 386 machine with 16 MB RAM and running Windows NTW 3.51 and wants to upgrade to NTW 4.0, how to upgrade ?
Ans. Cannot upgrade to NTW 4.0, because minimum requirement for NTW 4.0 is 486.
2. Your computer is running Windows NT 3.51 Workstation on an HPFS partition. You would like to upgrade to Windows NT 4.0 Workstation. How should you proceed?
A) Convert to NTFS, then upgrade to Windows NT 4.0
B) Run winnt.exe and install Windows NT 4.0 in the same directory
C) Run winnt32.exe and install Windows NT 4.0 in the same directory
D) Upgrade to NT 4.0 and then convert to HPFS
Ans. A
3. Situation : You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum speed of access to its local (mainly graphic data) files, varying in size from 1 MB to 10 MB, for other computers in the same LAN. You have there a SCSI controller with 4 disks of 2 GB each, formatted with FAT.
Required result : To optimize performance for optimum speed of access to local data files.
Optional results : Reconfigure for optimum speed of access to paging file.
Optimize network access performance.
Proposed solution: Configure the first hard disk as boot partition. Configure the other 3 disks as a Stripe Set. Use NTFS on all partitions. Place data and paging file on the Stripe Set. . Configure binding order of protocols; move most used protocols to the bottom of binding order.
The solution produces :
A) The required result and 2 of the optional results.
B) The required result and 1 of the optional results.
C) The required result and none of the optional results.
D) None of the required results.
Ans. I chose B, but it is C because placing paging file on Stripe set does not increase the performance.
4. What happens when you run a 16-bit windows based application in its own memory space?
(choose 2)
A) Application runs at higher priority
B) Application can be pre-emptively multitasked
C) Application uses less system memory
D) Application cannot interfere with execution of other 16-bit windows based apps running at the same time.
Ans. I chose B & D
5. You installed Client Service for NetWare on a Windows NT workstation. Which networking tasks can be performed from the computer? (Choose all that apply)
A) Allow NetWare client computers to use shared directories and printers on your NT WS computer.
B) Connect to volumes or directories on a NetWare Server.
C) Connect to print queues on a NetWare Server.
D) Connect to NetWare 4.1 volumes on servers that do not run bindery emulation
E) Run the NetWare 3.12 syscon utility from your Windows NT WS computer.
F) Run NetWare login scripts during the logon process.
G) Function as a Gateway to the NetWare server for other Windows NT WS computers that do not have CSNW installed.
Ans. I chose B, C, D, E, F, but I guess C may not be correct, pls. confirm.
6. You have Netware 4.x. What are the two ways to change passwords ?
Ans. Use Setpass and Ctrl+Alt+Delete.
7. Running 16 bit Windows based applications, where do they run by default ?
A) In separate memory space
B) Within system virtual machine
C) In a single virtual DOS machine
D) In a separate DOS machine that share memory.
Ans. I chose C.
8. 'abc' is a member of users group and wants to share a FAT folder from his machine running NTW. How he can share it, so that Everyone special group will get read permission to that folder ?
A) Login as Administrator, goto Windows NT Explorer, right click the folder, share it & assign the permission.
B) Login as 'abc', goto Windows NT Explorer, right click the folder, share it & assign the permission.
C) Login as 'abc' and use User Manager.
D) some other option
Ans. I chose A.
9. Three integrated applications are running & one is crashing everytime and halting other 16 bit applications also. How to prevent this applications so that other 16 bit applications will not afffect ?
Ans. Run the 3 integrated applications in the default NTVDM and other 16 bit applications in their own NTVDM's.
10. The printing job of Invoices is sent to a printer and it jams in between. The program will not allow to re-submit the job to the printer, what you will do to rectify this problem ?
A) Select resume from document menu
B) Select restart from document menu
C) Select cancel from document menu and then restart
D) Select refresh from view menu and then resume
Ans. B
11. Situation : NT Workstation with 4 identical 2 GB SCSI hard disks. The system has multiple protocols installed & configured. All disks consists of single partition with FAT, paging file is in boot partition.
Required result: Optimize speed of access to local data files.
Optional results: Speed-up the access to paging file.
Optimize computer network access performance.
Proposed solution: Configure all the hard disks as a Volume set and format with FAT. Keep paging file on the boot partition. Configure binding order of protocols - move most used protocols to the top of binding order.
The solution produces :
A) The required result and 2 of the optional results.
B) The required result and 1 of the optional results.
C) The required result and none of the optional results.
D) None of the required results.
Ans. D, because creating volume set does not meet the required result as it is slow when compared with Strite set.
That's all I remember, okay we will meet in NTS brain dump, which I passed on 5th April '99 with a score of 771.
All the best, bye
Reddy PR
=======================================
I passed Nt Workstation(70-073) Last Week. Although my score is not high, I also try my best to remember the test questions because I think I should contribute my experience.
PLEASE CHECK THE ANSWER BY YOURSELF.
1. Which takes precedence, system policy or roaming user profile?
Note. Policy over profiles
User policy over system policy
Machine policy over all.
2. How do you start the command "ntbackup /r /e" with low priority?
A. start /low ntbackup /r /e
3. What two things do you need to print to a TCP/IP printer on a network?
Answer:
A. IP address and printer name.
4. Client service for Netware :
a. allow Netware client to use share directory and printer on NT Workstation.
b. connect volumes or directory on Netware.
c. connect printer queues on Netware.
d. connect Netware 4.1 volume on server that do not run bindery emulation.
e. Run Netware 3.1 syscon utility from NTWS.
f. Run login script on netware server
g. Function as gateway to NTWS for them NTWS that do not have CSNW installed.
Ans : b,c,d, e,f
5. Computer has 2 ISDN adapters installed. Each adapter has 2 B-Channels that can be used with Dial-Up Networking to connect to your company's RAS Server. RAS Server also has 2 ISDN adapters. Each B-Channel has its own phone number. How do you configure and use Dial-Up Networking's Multi-Link option to use all four channels when you connect to the RAS Server?
A. Create a phonebook entry for each ISDN B-Channel. Connect to RAS Server using all four entries.
B. Create one phonebook entry that has the four phone numbers. Connect to RAS Server by using this entry.
C. Create one phonebook entry for each ISDN adapter. Connect to RAS Server by using both entries.
D. Create one phonebook entry that is configured to use multiple lines. Assign a phone number to each line. Connect to RAS Server by using this entry
Ans: B
6. You install CSNW on Workstation computer. What are the 2 different ways to change password for your Netware 4.x user account from Windows NT Workstation computer?
(Choose two)
A. Choose Network from Control Panel.
B. Use Netware Setpass Utility at Command Prompt.
C. At Command Prompt, type the following command: net password.
D. Press Ctrl+Alt+Del and click Change Password in Windows NT Security Dialog box.
Ans D & B
7. You have several DOS program you want to run under NT. You need to run a TSR that controls the COM port for these DOS program. How do you run MS-DOS the Terminate and Stay Resident (TSR) application?
A Start it in its own NTVDM
B Start it in the default NTVDM
C Start it using Config.nt
D Start it using Autoexec.nt
Answer: B
8. Question about Nt utilities for statistics:
Performance Monitor
Task Manager
9. You need to install MIDI device? In which box?
Multimedia
10. You are the administrator of a Windows NT Workstation computer that is used by three people.The users work different shifts in a facility that handles confidential information. The users want to maintain the security of their own files. They also want to customize their won Windows NT Workstation desktop environment, including screen colors and program groups. Which three steps must you take?
Ans.: Create a user account for each user.Create a home directory for each user on a NTFS partition. Ensure the directory permission are configured so that users have exclusive access to their own home directory.
11. Situation (Long): You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum speed of access to its local (mainly graphic data) files, varying in size from 1MB to 10MB, for other computers in the same LAN. You have there a SCSI controller with 4 disks of 2 GB each,formatted with FAT.
Required result: To optimize performance for optimum speed of access to local data files.
Optional results: Reconfigure for optimum speed of access to paging file.
Optimize network access performance.
Proposed solution:Configure the first hard disk as boot partition. Configure the other 3 disks as a Volume Set. Use FAT on all partitions. Place data on the Volume Set. Place paging file on the boot partition. Configure binding order of protocols; move most used protocols to the bottom of binding order.
The solution produces:
A The required result and 2 of the optional results.
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results.
Note: Volume sets DO NOT speed up disk access.
Answer: D
12. You want to monitor attemps of printing. You set the security in printer. And what else should you do ?
In the User Manager for Domain set the audit "File and Object Access"
13. You use performance monitor and see your processor is running at 92% and you have excess paging. What would be the best way forward to address the issue?
a) Add another processor
b) Add more RAM
c) Increase the size of the page file
Ans: B
14. Your network dose not use TCP/IP protocol. Which Protocol do you need to print to a HP printer ?
A IP-address
B NetBEUI
C DLC
D Default gateway
Answer: C
15. You make a NT Boot disk which can use on your computer without problems. But it cannot be used On John¨s Computer.
A. Edit the Boot.ini file on the disk to change the ARC naming
HAIRinWIND shanghai China
===========================================
Windows NT Workstation4.0
I'm chang-hwan in korea!!I took this test today!Required score is 547 and I got 746!!!Of course pass!!
Thanks to this braindumpsite!!
I've got 15 questions!
1.slow performance because of excesive paging!What todo?
Add ram
2.Paper jam hapen!and document is serousely damaged!How to reprint?
In document menu restart!
3.You wanna change password of NW4.X on ur NT workstation!
How can you do this?(Two answer)
setpass, Ctrl+Alt+Del
4.Automate install NT with 100 identical computer!
You have Unattended.txt! what is the role of this file during install??
Hardware configuration and other configuration data for computer!
(Sorry I can't remember the exact words)
5.You wanna install unix printer!What do you must have?(choose two)
IP of server
Printer name
6.You use NT 3.51 with HPFS.How to upgrade to 4.0?
convert to NTFS and run winnt32 in same directory winnt3.51!
7.You wanna run TSR(Terminate and stay Resident).How to?
autoexec.nt
8.You have no Network Adapter Card.But still wanna binding!What to do?
Install Loopback adapter card!
9.Unattended installation with setup.inf, UDF and sysdiff!
You can't make it!
setup.inf is bogus stuff!!!!!You need unattended.txt
10.You wanna disable blank page when you use NW printer and you use csnw!How to?
control panel---csnw-----deselect add form feed
11.What can be made on ur WS computer installed CSNW?
a.allow netware client computers to use shared directories and printers
b.connect to volumes on a netware server!
c.connect to print queues in a NW server
d.connect to netware 4.1volumes in servers that do net run bindery emulations
e.run syscon utility from ur NT Workstation computer!
f.login scripts during logon
g.function as a gateway server
My choices was b,c,d,,e,f
12.200 identical computer,and You wanna automate the installation.
What do you need?(Three choices)
Unattended.txt,UDF,sysdiff.com
13.You have 4 2GB FAT harddisk!first disk is boot partition and you have ethernet card and multiple protocols! and You will use datafile which size is between 1mb~10mb!
Required result:Optimize speed local access data!
Optional result:speed up network.Optimze paginng file!!
and let hard disk remain FAT,paging file on boot partition,and making volume set with other three hard disk!! Binding order low least used protocols
answer was nothing will be achieved!
14.You wanna backup in minimum size and low priorty!
start /min /low backup bla bla bla
15.3intergratd 16bit application shared memories!and You wanna these app not to interfer other 16-bit application!How to do it?
3 intergrated 16bit app in defult and others in seperate memory spaces!
That's all!!
Here's my recommandations!
Study with MOC and do some Lab with Lab book!
and then u just need braindump and trancender!
It's enough to pass test!
Good luck!